If you are wondering about a jumpstart nearby then there are many possible ways available with simple steps and you can do this process with or without jumper cables. You must make sure that while using the jumper cable then you must have enough position to fix the cable between the cars. The most important warning in jumping the car is that you must have safety equipment such as gloves and glasses along with the roadside emergency kit.
The procedure to make the jump of car is:
- You must locate the positive and negative clamps and if you use the color code of the jumper cables then it must be easy to connect where it must be very less dangerous.
- If the vehicle contains god battery which is not running then the ignition turned off
- Connect the red clamp with the positive post in the dead battery
- Connect the other clamp with the negative post of the good battery.
- Connect the black clamp with the negative post of the good battery
- Avoid connecting the remaining black clamp post to the dead battery. Instead of that you have to connect it with a metal piece which is exposed, which may be the bolt or any hood.
- While connecting the final clamp then you will know on viewing the connection and it must be perfect if you can see the tiny spark.
- The most important warning in the connection is to avoid connecting the negative post of the dead battery with the final clamp or if you connect then you will be at risk of igniting where the flammable of hydrogen is high which comes from the battery.
- The car which contains the good battery must start and wait for few minutes
- After a few minutes you have to make the start of the dead battery car and if it does not start then wait a few more minutes and start again.
- If the car containing the dead battery starts then you have to remove the jumper cable and you have to remove it from reverse order as soon as possible and you have to start remove it from the exposed metal piece.
This is the simplest procedure to jump start a car using the jumper cable but the older technique to start the car is replacing the battery after it dead but it takes a long time but in this method you don’t want to remove it and you can directly connect with the other battery using the jumper cable to start a car. If you use this on the older car battery then it must be quite a risk because the older battery has some trouble in holding the power to start the car. If you want to jump the car or truck frequently then you can use this method to hold the power in the dead battery which is the simplest method to jump the car to start.
